Location of main effect lights
There are not many computer effect lights in our station, so how can they play a greater role? First of all, it is to meet the needs of cameras, and each camera is at least given a fulcrum of "light". Our station usually uses four cameras to record programs. Cameras 1 and 3 cross shoot at the front. Camera 2 is responsible for covering the big view and small panorama. Camera 4 is a rocker arm.
During the shooting of the program, the use of camera lens in No. 1 and No. 3 stands is the largest. Therefore, the shooting fulcrum of these two stands should be satisfied first. I choose these two points at the back of the two corners behind the stage, close to the corner of the rear bottom curtain, and keep a safe distance from the bottom curtain. Each point is equipped with 6 computer color changing lamps, which are divided into two rows, one row of tube lamps with color changer formation on the left and right sides to extend the point.
In this way, the upper part of camera 1 and camera 3 is no longer empty. Almost every camera has rich color and full picture. The fulcrum of camera 2 is selected at the back center of the stage, extending to both sides with the center of the last two lamp poles as fulcrum. The last pole is hung with 16 tube lamps of color changer, the second pole is hung with the remaining 6 color change lamps, and the four scanning lamps are hung in the gap between the four rows of 2000W backlight lamps of color changer. In this way, camera 2 can pull up the panorama or push down the panorama Scene, the back three points will cooperate with the lens to give it a satisfactory picture.
The fulcrum of No. 4 rocker arm is generally selected on its lifting frame. Usually, on the theme or representative scenery of the party, effect lights or fixed-point lights are used to make several effects for rocker arm selection. This is to use the existing lamps and lanterns to meet the needs of the camera lens as much as possible. Colleagues say that the picture taken is better than the scene. Maybe that's why we are "opportunistic".
Highlight the theme
Sometimes it's not bad to change channels in the middle of watching TV, but after watching the program for a few minutes, you can't see the theme, which will make the audience unclear and the leaders and sponsors dissatisfied. Therefore, in light distribution, we should first consider highlighting the theme and the important signs related to the theme. Such an effect is usually achieved by fixed-point light or mobile light.
In order to lighten it and make it have a three-dimensional sense, it is necessary to choose a suitable angle, such as oblique side light. At the same time, according to the atmosphere of the program, a suitable color paper is sandwiched on the lamp mouth to make the theme more distinctive. In addition, in the back and both sides of the performance scene, in order to set off the theme, some scenery or plants will be placed embellished. Of course, these also need to be decorated with light, with appropriate color paper, the effect of using side light or side backlight is far better than using smooth light.
For example, two green bamboos are placed on the right side of the stage. If the 2kW spotlight sandwiched with green paper is used to decorate the opposite position on the right side, it will make the bamboos look more green and vibrant.
Height of pole